Professional Audio
Power amplifier ROXTON RX-Extra 4000 2 x 1300 W (8 ohms), 2 x 2000 W (4 ohms), 2U, built-in crossover, limiter, LCD.
ROXTON RX-Extra 4000 amplifiers are equipped with advanced protection systems: special LRS short circuit protection system, advanced input overload protection system, DC protection.
ROXTON RX -Extra 4000 can be driven into 2 ohms.
The RX-Extra series amplifiers are equipped with a CLIP limiter. This protection system can operate regardless of impedance and frequency range. Soft limiter operation effectively protects loudspeakers from short-term overloads.
The crossover of the ROXTON RX-Extra 4000 amplifier is based on Linkwitz-Riley filters with a slope of 24 db/oct. The crossover frequency is 120 Hz, which is suitable for most subwoofers and satellites.
Front panel LCD display ROXTON RX-Extra 4000 displays various amplifier status information such as temperature, operating mode , information about protection operation, etc.
ROXTON RX-Extra 4000 amplifiers are equipped with advanced protection systems: special LRS short circuit protection system, advanced input overload protection system, DC protection.
ROXTON RX -Extra 4000 can be driven into 2 ohms.
The RX-Extra series amplifiers are equipped with a CLIP limiter. This protection system can operate regardless of impedance and frequency range. Soft limiter operation effectively protects loudspeakers from short-term overloads.
The crossover of the ROXTON RX-Extra 4000 amplifier is based on Linkwitz-Riley filters with a slope of 24 db/oct. The crossover frequency is 120 Hz, which is suitable for most subwoofers and satellites.
Front panel LCD display ROXTON RX-Extra 4000 displays various amplifier status information such as temperature, operating mode , information about protection operation, etc.
| ROXTON RX-Extra 4000 AMPLIFIER POWER | |
|---|---|
| 8 Ohm stereo | 2 x 1300W |
| 4 Ohm stereo | 2 x 2000W | 2 ohm stereo | 2 x 2200W |
| 8 ohm bridged | 4000W |
| 4 ohm bridged | 4400W |
| ROXTON RX-Extra 4000 AMPLIFIER SPECIFICATIONS< /th> | |
| Crossover frequency | 120 Hz |
| Low cut filter | 30 Hz |
| Surge protection | yes |
| Short circuit protection | yes |
| Overheat protection | yes |
| Input overload protection | Yes |
| Output overload protection | Yes |
| Soft start protection | yes |
| Frequency range | 20 Hz - 20 kHz |
| Sensitivity | 1.0 V |
| Operating mode | stereo/parallel/bridge |
| two speed | |
| Input impedance balanced | 20 k? |
| Input impedance unbalanced | 10 k? |
| Signal-to-noise ratio | more than 100 dB |
| Dumping factor | over 700 |
| Intermodulation distortion | 0.5% |
| Harmonic distortion (20 Hz - 20 kHz, 8 ohms) | 0.5% |
| Amplifier class | H+ |
| OTHER ROXTON RX-Extra 4000 FEATURES | |
| Inputs | XLR+XLR |
| Outputs | 3 x Speakon |
| Weight | 38.0 kg |
Power amplifier ROXTON RX1500 2 x 450 W (8 ohms), 2 x 700 W (4 ohms), 2U, built-in crossover, limiter, LCD.
ROXTON RX1500 amplifiers are equipped with advanced protection systems: special LRS short circuit protection system, advanced input overload protection system, DC protection.
ROXTON RX1500 > can be driven into 2 ohms.
The RX series amplifiers are equipped with a CLIP limiter. This protection system can operate regardless of impedance and frequency range. Soft limiter operation effectively protects loudspeakers from short-term overloads.
The crossover of the ROXTON RX1500 amplifier is based on Linkwitz-Riley filters with a slope of 24 db/oct. The crossover frequency is 120 Hz, which is suitable for most subwoofers and satellites.
The front panel LCD display of the ROXTON RX1500 displays various amplifier status information such as temperature, operating mode, protection operation, etc.
ROXTON RX1500 amplifiers are equipped with advanced protection systems: special LRS short circuit protection system, advanced input overload protection system, DC protection.
ROXTON RX1500 > can be driven into 2 ohms.
The RX series amplifiers are equipped with a CLIP limiter. This protection system can operate regardless of impedance and frequency range. Soft limiter operation effectively protects loudspeakers from short-term overloads.
The crossover of the ROXTON RX1500 amplifier is based on Linkwitz-Riley filters with a slope of 24 db/oct. The crossover frequency is 120 Hz, which is suitable for most subwoofers and satellites.
The front panel LCD display of the ROXTON RX1500 displays various amplifier status information such as temperature, operating mode, protection operation, etc.
| ROXTON RX1500 AMPLIFIER POWER | ||
|---|---|---|
| 8 ohm stereo | 2 x 450W | |
| 4 ohm stereo | 2 x 700W | |
| 2 Ohm stereo | 2 x 750W | |
| 8 Ohm bridged | 1400W | |
| 4 ohm bridged mode | 1500W | |
| ROXTON RX1500 AMPLIFIER CHARACTERISTICS | ||
| Crossover frequency | 120 Hz | |
| Surge protection | yes | |
| Short circuit protection | yes | |
| Overheating protection | yes | |
| Input overload protection | yes | |
| Output overload protection | yes | |
| Soft start protection | yes | |
| Frequency range | 20 Hz - 20 kHz | |
| Sensitivity | 1.0 V | |
| Operating mode | stereo/ parallel/bridge | |
| Fan mode | two-speed | |
| Input impedance balanced | < td>20 k?||
| Input impedance unbalanced | 10 k? | |
| Signal-to-noise ratio | ||
| Signal-to-noise ratio | 10 k? td> | more than 95 dB |
| Dumping factor | more than 300 | |
| Intermodulation distortion< /td> | 0.5% | |
| Harmonic distortion (20 Hz - 20 kHz, 8 ohms) | 0.5% | |
| Amplifier class | AB | |
| OTHER CHARACTERISTICS OF THE ROXTON RX1500 | ||
| Inputs | Jack+XLR | |
| Outputs | Terminals and Speakon | |
| Weight | 19.0 kg | |